Porous Si3N4 ceramics prepared by aqueous gelcasting using low–toxicity DMAA system: Regulatable microstructure and properties by monomer content

In this study, the low–toxicity monomer N, N–dimethylacrylamide (DMAA), serving as both gelling agent and pore–forming agent, was adopted to fabricate porous Si₃N₄ ceramics with a regulatable microstructure and property by aqueous gelcasting. Results indicate that monomer content played an important role in regulating and optimizing the properties of sintered bodies. With increasing monomer content (5.94–30.69?wt%), both slurry viscosity (maximum 0.14?Pa?s at 95.40 s^?1) and green body strength (11.35–49.23?MPa) exhibited monotonic increasing trends, demonstrating superior mechanical properties to those obtained using the neurovirulent acrylamide (AM) gelling system. The increased monomer content not only improved porosity, but also promoted α→β–Si₃N₄ transformation as well as β–Si₃N₄ grain growth through enhancing the connectivity of interlocking pores and accelerating the vapor phase transport during liquid–phase sintering. These variations in phase composition and microstructure derived from the varied monomer content further resulted in monotonic changes in porosity (40.32–51.50%), mean pore size (0.27–0.38?μm), flexural strength (202.77–132.15?MPa), fracture toughness (2.93–2.32?MPa?m^1/2), dielectric constant (3.48–2.78) and loss (3.52–3.09?×?10^?3) at 10?GHz for sintered bodies, displaying an excellent comprehensive properties. This study suggests a promising prospect for DMAA in preparation of high–performance porous Si₃N₄ ceramics by aqueous gelcasting.     

Single transition metal atom catalysts on Ti2CN2 for efficient CO2 reduction reaction

Electrochemical CO₂ reduction reaction (CO₂RR) is an efficient way in the utilization of CO₂. In this work, single transition-metal (TM) atom (TM = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn) anchored on two-dimensional (2D) Ti₂CN₂ are designed for CO₂RR using density-functional-theory (DFT) calculation. We show that Ti₂CN₂ serves as an excellent substrate to support single atom catalysts (SACs), compared to Ti₂CO₂ and Ti₂CF₂. We find that the Sc, Ti and V supported on Ti₂CN₂ show high catalytic activities to produce CO with a low overpotential of 0.37, 0.27, and 0.23 eV, respectively. Differently, the Mn and Fe on Ti₂CN₂ are catalytically active for the production of HCOOH with a low overpotential of 0.32 and 0.43 eV, respectively. We further show that the negatively charged TM-Ti₂CN₂ can capture and activate CO₂ more effectively, and the catalytic activity and selectivity can be significantly tuned by injecting extra electrons.     

Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots

Femtosecond (fs) lasers have been proved to be reliable tools for high-precision and high-quality micromachining of ceramic materials. Nevertheless, fs laser processing using a single-mode beam with a Gaussian intensity distribution is difficult to obtain large-area flat and uniform processed surfaces. In this study, we utilize a customized diffractive optical element (DOE) to redistribute the laser pulse energy from Gaussian to square-shaped Flat-Top profile to realize centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates. We systematically investigated the effects of processing parameters on the changes in surface morphology and composition, and an optimal processing strategy was provided. Mechanisms of the formation of surface nanoparticles and the removal of surface micro-burrs were discussed. We also examined the distribution of subsurface defects caused by fs laser processing by removing a thin surface layer with a certain depth through chemical mechanical polishing (CMP). Our results show that laser-induced periodic surface structures (LIPSSs) covered by fine SiO₂ nanoparticles form on the fs laser-processed areas. Under optimal parameters, the redeposition of SiO₂ nanoparticles can be minimized, and the surface roughness Sa of processed areas reaches 120 ± 8 nm after the removal of a 10 μm thick surface layer. After the laser processing, micro-burrs on original surfaces are effectively removed, and thus the average profile roughness Rz of 2 mm long surface profiles decreases from 920 ± 120 nm to 286 ± 90 nm. No visible micro-pits can be found after removing ~1 μm thick surface layer from the laser-processed substrates.     

Visual Detection of Adenosine Triphosphate by Taylor Rising: A Simple Point-of-Care Testing Method Based on Rolling Circle Amplification

Rapid and sensitive point-of-care testing (POCT) is an extremely critical mission in practical applications, especially for rigorous military medicine, home health care, and in the third world. Here, we report a visual POCT method for adenosine triphosphate (ATP) detection based on Taylor rising in the corner of quadratic geometries between two rod surfaces. We discuss the principle of Taylor rising, demonstrating that it is significantly influenced by contact angle, surface tension, and density of the sample, which are controlled by ATP-dependent rolling circle amplification (RCA). In the presence of ATP, RCA reaction effectively suppresses Taylor-rising behavior, due to the increased contact angle, density, and decreased surface tension. Without addition of ATP, untriggered RCA reaction is favorable for Taylor rising, resulting in a significant height. With this proposed method, visual sensitive detection of ATP without the aid of other instruments is realized with only a 5 μL droplet, which has good selectivity and a low detection limit (17 nM). Importantly, this visual method provides a promising POCT tool for user-friendly molecular diagnostics.     

Ultrahigh and field-independent energy storage efficiency of (1-x)(Ba0.85Ca0.15)(Zr0.1Ti0.9)O3-xBi(Mg0.5Ti0.5)O3 ceramics

Relaxor ferroelectrics are attracting an increasing interest in the application of pulse power systems due to their excellent energy storage performance. In this paper, the (1-x)(Ba_0·85Ca_0.15)(Zr_0·1Ti_0.9)O₃-xBi(Mg_0·5Ti_0.5)O₃ ((1-x)BCZT-xBMT, x ≤ 0.2) relaxor ceramics are prepared by the solid state method. The influence of BMT on the microstructure, dielectric and energy storage properties of the prepared ceramics is investigated. The XRD results show that the peak intensity of impurities (Bi₂O₃, TiO₂ and Ba₂Bi₄Ti₅O₁₈) is gradually stronger than that of BCZT phase with x increasing. Meanwhile, the grain size of (1-x)BCZT-xBMT ceramics gradually increases on account of the appearance of impurities Bi₂O₃. Influenced by the impurities and BMT, the dielectric constant of prepared ceramics gradually decreases with x increasing. A large W_rec value of 0.65 J/cm³ with an ultrahigh η value of 97.89% is achieved at x = 0.15 due to the high breakdown strength and slim P-E hysteresis loop. Meanwhile, the η is insensitive to the electric field. The ultrahigh η leads to lesser energy loss during the charge and discharge process. It makes the 0.85BCZT-0.15BMT ceramic more attractive in the application of pulse power systems.     

CaDHN3, a Pepper (Capsicum annuum L.) Dehydrin Gene Enhances the Tolerance against Salt and Drought Stresses by Reducing ROS Accumulation

Dehydrins (DHNs) play an important role in abiotic stress tolerance in a large number of plants, but very little is known about the function of DHNs in pepper plants. Here, we isolated a Y₁SK₂-type DHN gene “CaDHN3” from pepper. To authenticate the function of CaDHN3 in salt and drought stresses, it was overexpressed in Arabidopsis and silenced in pepper through virus-induced gene silencing (VIGS). Sub-cellular localization showed that CaDHN3 was located in the nucleus and cell membrane. It was found that CaDHN3-overexpressed (OE) in Arabidopsis plants showed salt and drought tolerance phenotypic characteristics, i.e., increased the initial rooting length and germination rate, enhanced chlorophyll content, lowered the relative electrolyte leakage (REL) and malondialdehyde (MDA) content than the wild-type (WT) plants. Moreover, a substantial increase in the activities of antioxidant enzymes; including the superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), ascorbate peroxidase (APX), and lower hydrogen peroxide (H₂O₂) contents and higher O₂^•− contents in the transgenic Arabidopsis plants. Silencing of CaDHN3 in pepper decreased the salt- and drought-stress tolerance, through a higher REL and MDA content, and there was more accumulation of reactive oxygen species (ROS) in the CaDHN3-silenced pepper plants than the control plants. Based on the yeast two-hybrid (Y2H) screening and Bimolecular Fluorescence Complementation (BiFC) results, we found that CaDHN3 interacts with CaHIRD11 protein in the plasma membrane. Correspondingly, the expressions of four osmotic-related genes were significantly up-regulated in the CaDHN3-overexpressed lines. In brief, our results manifested that CaDHN3 may play an important role in regulating the relative osmotic stress responses in plants through the ROS signaling pathway. The results of this study will provide a basis for further analyses of the function of DHN genes in pepper.     

Symmetry Breaking in Monometallic Nanocrystals toward Broadband and Direct Electron Transfer Enhanced Plasmonic Photocatalysis

Metallic nanocrystals manifest themselves as fascinating light absorbers for applications in plasmon-enhanced photocatalysis and solar energy harvesting. The essential challenges lie in harvesting the full-spectrum solar light and harnessing the plasmon-induced hot carriers at the metal–acceptor interface. To this end, a cooperative overpotential and underpotential deposition strategy is proposed to mitigate both the challenges. Specifically, by utilizing both ionic additive and thiol passivator to introduce symmetry-breaking growth over gold icosahedral nanocrystals, the microscopic origin can be attributed to the site-specific nucleation of stacking faults and dislocations. By adopting asymmetric crystal shape and unique surface facets, such nanocrystals attain high activity toward photocatalytic ammonia borane hydrolysis, arising from combined broadband plasmonic properties and enhanced direct transfer of hot electrons across the metal–adsorbate interface.     

Structure and Properties of Nonstoichiometric Y1-xNbxO1.5+x for Thermal Barrier Coatings

Understanding the effect of nonstoichiometry on material properties is of critical importance for the Thermal Barrier Coatings (TBCs) application. In this work, the effect of nonstoichiometry was systematically investigated in Y₃NbO₇, a recently identified promising TBCs material for next-generation gas turbine engines. The results show that the nonstoichiometry effect mediates the microstructure, mechanical properties, thermophysical properties, oxygen ionic conductivity and optical transmittance. The results suggest that the oxygen ionic conductivity is correlated to the mass diffusion in the oxygen-deficient fluorite oxides Y_1-xNb_xO_1.5+x. The stoichiometric composition Y₃NbO₇, with the lowest thermal conductivity and slowest mass diffusion in Y_1-xNb_xO_1.5+x series, is optimal for the TBCs application, which can be of relevance for TBCs material design and coating fabrication.     

Block size selection in rate-constrained geometry based point cloud compression

Multimedia Tools and Applications - In geometry-based point cloud compression, the geometry information is typically compressed using octree coding. In octree coding, the size of the blocks in the...